NitroTek
GS RACING SHADOW SB1 NITRO RC BUGGY
| 450mm | |
| 326mm | |
| 150mm | |
| 50mm | |
| 296mm | |
| F/R 265mm | |
| 2350g | |
| Infinity .18 rear exhaust |
- ,
- 2.4G radio gear ,
- ,
- 100% factory assembled 1/10th scale race buggy ,
- Over 50% compatible with Shadow ST1R series truck ,
- Fully fitted with precision ball bearings ,
- Unique rear exhaust system ,
- Powerful Team Infinity .18 Pull Start Engine ,
- Pre-glued off road tyres on GS super buggy wheels ,
- Pre-painted and trimmed Kom Designs body with decals ,
- Front universal driveshafts ,
- Long travel, coil over, impact absorbing oil filled shocks. ,
- 4WD transmission with center slipper clutch ,
- GS high performance crown gear and pinion gear made of powder metallurgy steel ,
- GS "Competition Line" high quality race differential gears ,
NitroTek
GS RACING 1:9 SCALE MITSUBISHI PAJERO CONQUEROR NITRO RALLY TRUCK
| 490mm | |
| 230mm | |
| 210mm | |
| 29mm | |
| 304mm | |
| 2350g | |
| C47/13T, F/R |
- ,
- Track: F: 198mm R: 200mm ,
- 2.4G radio gear ,
- ,
- 100% factory assembled 1/8th scale race buggy ,
- Over 50% compatible with Shadow SB1 series Buggy ,
- Fully fitted with precision ball bearings ,
- Tuned rear exhaust system ,
- Powerful Team Infinity .18 Pull Start Engine ,
- GS 1/9th Pre-glued rally wheels on Mitsubishi Pajero Wheels ,
- Pre-painted and trimmed Kom Designs body with decals ,
- Front Universal driveshafts ,
- All new design GS rally car suspension system ,
- Front and rear sway bar system ,
- GS "Competition Line" high quality race differential gears ,
- GS high performance crown gear and pinion gear made of powder metallurgy steel ,
- 4WD transmission with center slipper clutch ,
This is a real innovation from GS and is a ...
NitroTek
GS RACING ST1 1/10 NITRO RADIO CONTROLLED TRUGGY
| 430mm | |
| 330mm | |
| 155mm | |
| 28mm | |
| 295mm | |
| F/R 265mm | |
| 2213.8g |
- ,
- 2.4G radio gear ,
- 75cc fuel tank ,
- ,
- 100% factory assembled 1/10th scale truck ,
- Over 50% compatible with Shadow ST1R series truck ,
- Fully fitted with precision ball bearings ,
- Tuned .18 exhaust system ,
- Powerful Team Infinity .18 Pull Start Engine ,
- Pre-glued off road tyres on GS super truggy wheels ,
- Pre-painted and trimmed Kom Designs body with decals ,
- Front Universal driveshafts ,
- Long travel impact absorbing oil filled shocks ,
- 4wd transmission with centre slipper clutch ,
- Front/rear sealed gear diffs ,
- Ultra thick and durable suspension arms with capture hinge pins ,
- Low profile radio tray ,
- Taiwan high quality build and components ,
NitroTek
AOWEI 1/5TH SCALE 26CC YAMA PETROL RC BUGGY 2.4GHZ
| 18kgf.cm/22kgf.cm; Throttle | |
| ≥200m | |
| 1/5 | |
| 80km/h | |
| Speedup, Forward, Turning Left & Right | |
| Rear 2WD Drive System | |
| Twin Rear Disc Brake | |
| single cylinder, two stroke, air-cooled, 26cc | |
| Gasoline Octane (93# or above) /+ Synthetic Oil (25 | |
| 0.5L | |
| Pull Start | |
| 170X60mm(F) / 170X80mm(R) | |
| 520mm | |
| 350mm(F) / 360mm( R ) | |
| 6.5/8.5(F/R) |
- ,
- Receiver(2.4G for racing ,Ni-H batteries 5x1.2v(2Channels) ,
- ,
- 2WD Twin Rear Disc Brake ,
- High Quality 2.4GHz Radio ,
- High Performance 26cc Engine ,
- Full-assembled Aluminium Chassis ,
- Fully Proportional Steering and Throttle ,
- Fully Adjustable Oil-filled Shock Absorbers ,
- Differential with the Built-in Gears ,
HobbyKing
HOBBYKING KATANA .46 EP 1400MM (ARF)
| Wingspan | 1400mm |
| Length | 1310mm |
| Wing Area | 36g/dm2 |
| Suggested Prop | 12x8~14x10 |
Specs:, Flying Weight:, 2250g~2400g (with .46 engine), Requires:, Your Own 6 Channel TX/,
This high quality Katana has been built to satisfy both ...5 Reviews
HobbyKing
HOBBYKING NEMESIS .60 1700MM (ARF)
| Wing Span | 66.9in/1700mm |
| Wing Area | 50sq.dm |
| Length | 57in/1450mm |
| Flying Weight | 3000g |
| Battery | Receiver pack |
Note:, This is a glow engine model, some modelling experiance will be required for an EP conversion. A CD-Rom is included with the model that contains a detailed building guide for a glow setup., Specs:, Glow setup:, Radio:, 4channels 5 std. servos (Required), Engine:, 2cycle .60 or 4cycle .91 (Required), EP Setup:, Radio:, 4Channels 4 std. Servos (Required), Motor:, .60 Glow Equivalent (Turnigy EasyMatch G60 300~500kv) (Required), Battery:, 5000~6000mAH 5~6S Lipoly Battery (Required), ESC:, 80~100A (Separate BEC is recommended on large Models) (Required),
In air racing terms, there were planes built for going ...5 Reviews
HobbyKing
TURBORAVEN 0.60 EP/GLOW 1580MM (ARF)
| Wingspan | 1580mm |
| Length | 1440mm |
| Flying Weight | 3000g |
| Includes | Engine Mount |
Specs:, Engine:, 0.60 2 stroke or EP equivalent (not included), Requires:, Your own 4~6 Channel TX/RX,
This superb Turboraven really looks the part and is something ...5 Reviews
Hobby-Lobby
SPEKTRUM DX3S 3-CH. DSM 2.4 GHZ SURFACE RADIO
Most advanced sport-level DSM radio ever developed Combining Spektrum’s industry-leading 2.4GHz DSM technology with valuable telemetry features, the DX3S represents the most advanced sport-level DSM radio ever developed. RTR drivers and sport racers can add the safety of telemetry and monitor vital vehicle stats right from their transmitter, without any additional equipment. Keep your engine operating in the optimum temperature range, keep an eye on your battery voltage and check out just how fast your vehicle is running, all right from the large LCD readout of the DX3S. Includes an SR3300T 3-channel receiver. Spektrum DX3S 3 Ch. 2.4 GHz Surface Radio Features: Now compatible with the MR3000 3-channel marine receiver and DSM2 surface receivers, in addition to DSM surface receivers Integrated telemetry with graphically depicted gauges on transmitter* 10-model memory Includes free bonus SR300 3-channel DSM sport receiver Monitor your engine or motor’s operating temperature in either Fahrenheit or Celsius Never let a low battery stop you in your tracks - the DX3S and integrated telemetry let you watch over your receiver pack’s voltage to keep you in the running Keep tabs on your engine’s operating range-safe high-rev operation Rolling selector user interface for fast, easy programming and setup Digital trims Steering dual rate Travel adjust Sub trims Exponential 3-timer functions Aux/Steering channel mixing Telemetry alerts * The typical telemetry range is 100 - 200 feet and will vary depending on the operating environment. Specs: # of Channels: 3 Modulation: DSM Band: 2.4 GHz Servos: None Receiver: SR3300T and SR300 Model Memory: 10 Transmitter (Tx) Battery Type: 4 AA Alkaline (included), ,
Most advanced sport-level DSM radio ever developed Combining Spektrum’s industry-leading ...Hobby-Lobby
POWER 46 BRUSHLESS OUTRUNNER MOTOR, 670KV
| Technical Specifications | Power 46 Brushless Outrunner Motor, 670Kv Specs |
| Size | Replacement for 40 to 46-size glow engines |
| Bearings or Bushings | One 6 x 15 x 5mm Bearing, and Two 6 x 12 x 4mm Bearing |
| Recommended Prop Range | 12x8 to 14x10 |
| Voltage | 14.4 to 19.2 |
| RPM/Volt (Kv) | 670 |
| Resistance (Ri) | .04 ohms |
| Idle Current (Io) | 3.90A @ 10V |
| Shaft Diameter | 6mm (.24 in) |
| Overall Length | 55mm (2.15 in) |
| Weight | 290 g (10.0 oz) |
| Overall Diameter | 50mm (2.00 in) |
| Diameter | 50mm (2 in) |
| Length | 55mm (2.15 in) |
| Continuous Current | 40A |
| Maximum Burst Current | 55A (15 sec) |
| Cells | 12-16 NiMH/NiCd or 4-5S LiPo |
| Speed Control | 60A brushless |
Wire Gauge: 14, ,
Power 46 Brushless Outrunner Motor, 670Kv The Power 46 is ...Hobby-Lobby
POWER 60 BRUSHLESS OUTRUNNER MOTOR, 400KV
| Technical Specifications | Power 60 Brushless Outrunner Motor, 400Kv Specs |
| Size | Replacement for 60-size glow engines |
| Bearings or Bushings | One 6 x 15 x 5mm Bearing, and Two 6 x 12 x 4mm Bearing |
| Recommended Prop Range | 14x8 to 16x10 |
| Voltage | 18.5 to 28.8 |
| RPM/Volt (Kv) | 400 |
| Resistance (Ri) | .06 ohms |
| Idle Current (Io) | 2.70A @ 10V |
| Shaft Diameter | 6mm (.24 in) |
| Overall Length | 62mm (2.40 in) |
| Weight | 380 g (13.0 oz) |
| Overall Diameter | 50mm (2.00 in) |
| Diameter | 50mm (2 in) |
| Length | 62mm (2.4 in) |
| Continuous Current | 40A |
| Maximum Burst Current | 60A (15 sec) |
| Cells | 16- 24 Ni-MH/Ni-Cd or 5- 7S Li-Po |
| Speed Control | 60A brushless |
Wire Gauge: 14, ,
Ideal for 60-size sport and scale airplanes weighing 6 - ...Hobby-Lobby
POWER 25 BL OUTRUNNER MOTOR, 870KV
| Technical Specifications | Power 25 BL Outrunner Motor, 870Kv Specs |
| Size | Replacement for 25-size glow engine |
| Bearings or Bushings | One 5 x 14 x 5mm Bearing, and Two 5 x 11 x 4mm Bearings |
| Recommended Prop Range | 11x8 to 14x7 |
| Voltage | 12 to 16.8 |
| RPM/Volt (Kv) | 870 |
| Resistance (Ri) | .03 ohms |
| Idle Current (Io) | 2.40A @ 10V |
| Continuous Current | 32A |
| Maximum Burst Current | 44A (15 sec) |
| Cells | 3S to 4S LiPo or 10 to 14 NiMH/NiCd |
| Speed Control | 40 to 45A brushless |
| Weight | 190 g (6.7 oz) |
| Overall Diameter | 35mm (1.40 in) |
| Shaft Diameter | 5mm (.20 in) |
| Overall Length | 54mm (2.10 in) |
Wire Gauge: 14, ,
Power 25 BL Outrunner Motor, 870Kv The Power 25 is ...Hobby-Lobby
DLX THOMAS W/ANNIE/CLARABEL SET HO
| Technical Specifications | Scale |
| Length | 4" Length |
| Width | 1-3/8" Width |
| Height | 2" Height |
Includes:, (1) Thomas the Tank Engine,
Dlx Thomas w/Annie/Clarabel Set HO An authentic Thomas & Friends ...Hobby-Lobby
MAXIMUM DESTRUCTION 2WD TRUCK RTR W/ AM RADIO
| Technical Specifications | Maximum Destruction 2WD Truck RTR w/ AM Radio Specs |
| Scale | 1/10 |
| Length | 16.25 in. (413mm) |
| Width | 12.75 in. (324mm) |
| Wheelbase | 10.63 in. (270mm) |
| Weight | 65.3 oz. (1.85 kg) |
| Chassis | Composite Nylon |
| Motor or Engine | Titan 12T 550 (12-Turn) |
| Speed Control | XL-5 Electronic Speed Control |
| Radio | 2CH AM Radio |
,
Officially Licensed Monster Jam graphics Traxxas, the Official Hobby Class ...Hobby-Lobby
RUCKUS 1/10TH MONSTER TRUCK ORANGE
| Technical Specifications | Ruckus 1/10th Monster Truck Orange Specs |
| Scale | 1/10 |
| Length | 20 in (507mm) |
| Width | 5 lb (2268g) |
| Wheelbase | 13.1 (333mm) |
| Weight | 3.44 lb (1560 g) |
| Ground Clearance | 40mm |
| Chassis | Molded composite |
| Suspension | 4-wheel independent long-travel |
| Drivetrain | 2WD with gear differential and slipper clutch |
| Tire Type | Front |
| Motor or Engine | Dynamite 20T |
| Speed Control | DYN 12T with forward and reverse |
| Radio | AM 27MHz |
| Servos | Analog |
| Gear Pitch | 48P |
| Wheel Size | 2.2 300 series |
| Kit/RTR | RTR everything included |
| Shock Type | Composite long-travel coil-over, oil-filled |
| Body | Custom screened truck |
| Ball Bearings | Complete |
| Minimum Age Recommendation | 14 years |
| Experience Level | No Experience Necessary |
Is Assembly Required: No, ,
Chris Says: "This truck, along with its sister the Circuit, ...Hobby-Lobby
GRAVE DIGGER 2WD MONSTER TRUCK RTR W/2CH AM RADIO
| Technical Specifications | Grave Digger 2WD Monster Truck RTR w/2CH AM Radio Specs |
| Scale | 1/10 |
| Length | 16.25 in. (413mm) |
| Width | 12.75 in. (324mm) |
| Wheelbase | 10.63 in. (270mm) |
| Weight | 65.3 oz. (1.85 kg) |
| Chassis | Composite Nylon |
| Motor or Engine | Titan 12T 550 (12-Turn) |
| Speed Control | XL-5 Electronic Speed Control |
| Radio | 2CH AM Radio |
,
Officially Licensed Monster Jam graphics Fully assembled and Ready-to-Race®, the ...